For different users and test conditions, we can design and produce different sizesspecial environmental chambers to simulate different environmental conditions.IntroductionRoom, high and low temperature in improving the reliabilityof the at the same time, greatly reduces the power consumption, Using the temperature and humidity control system can realize automationand easy operation and development of new energy saving technology. Operators can into the lab to manipulate the characteristics of the experiment, for aerospace products, industrial products manufacturer in bulk or large parts, semi-finished products, product temperature (wet) provides the degree of environmental test conditions.Feature
board by the self-made warehouse assembly at the scene, and can provide various size specifications of the products according to the needs of users;
of the science of air flow design, make indoor temperature consistent (wet), avoid any corner;
7 inch LCD touch screen, temperature and humidity control system configuration in Chinese color display screen, a high degree of automation, simple operation;
programming for man-machine dialogue way, even for the first time the user can be barrier-free operation;
wireless alarm system, intelligent mobile phone and the perfect combination of instrument monitoring alarm system;
every product according to customer requirements, to ensure the equipment of applicability and high efficiency, energy saving;
according to need to use air cooled or water-cooled cooling way.
Walk-in Test chamber
Model
JWC8-6085
JWC12-6085
JWC20-6085
JWC30-6085
JW40-6085
Nominal internal volume（m³)
8m³
12m³
20m³
30m³
40m³
Performance
Temperature range
Optional range: -60 ℃ (-20 ℃, 40℃, 60℃)~High temperature+85 ℃ (+85 ℃, +120℃, +150 ℃)
Temperature range（JWC series only）
20%~98% R.H. (humidity working range+20 ℃~+85 ℃)
Temperature fluctuation
≤±0.5
Temperature uniformity
≤2℃
Temperature deviation
≤±2℃
Temperature deviation（JWC series only）
-3~+2%R.H.(75%R.H.above), ±5%R.H.(75%R.H.following)
Heating rate（average）
Optional range: 0.5~15 ℃/min, load can be specified
Cooling rate（average）
Optional range: 0.5~15 ℃/min, load can be specified
Remarks
Above indicators are measured in no load at ambient temperature of 20±2°C
(According to GB/T 5170.2-2017)
Internal dimensions（mm）
D
2000
3000
4000
4000
5000
W
2000
2000
2500
3000
3200
H
2000
2000
2000
2500
2500
External dimensions（mm）
D
3000
3000
5000
5000
6000
W
2240
2240
2740
2740
2940
H
2320
2320
2320
2820
2820
Remarks
The above external dimensions do not include unit dimensions.
Testhole
TwoΦ100, On the right side
Using environment temperature
5-40 ℃
Shell
Sprayed steel plate
Interior
SUS304 stainless steel
Cooling mode
Air-cooled（water temperature 7～28℃，hydraulic pressure 0.2～0.5Mpa，
To ensure cooling performance）
Controller
10′ Color touch screen Controller
Input
PT100+imported capacitive humidity sensor
Communication function
RS485 or standard RJ45 network interface, standard USB interface
Power supply
380V+10%/50HZ+1,three-phase-five-wire system (3P+N+G)
Meet the testing method
GB2423.1-2008、GB2423.2-2008、GB2423.3-2008:GB2423.4-2008
GJB150.3-2009、GJB150,4-2009、GJB150.9-2009
Safety precautions
Power supply undervoltage, overvoltage, phase loss, and phase sequence error protection; Triple over temperature protection; Short circuit protection for heater, refrigeration unit exceeding Voltage/ overload protection; Overload/ overheating protection for blower motor; Control board overcurrent protection and leakage protection, humidification fault protection.
Optional
Special testing holes, slopes, customized temperature rise and fall rates, etc.
