Introduction In the multi-axis rotation and different temperature, humidity and other environmental conditions, test the impact of environmental conditions on the performance of the device under test. For example, widely used in navigation, positioning and other areas of the gyroscope, test, gyroscope placed in a closed test chamber , and then multi-axis rotation device to drive the test chamber to achieve different axial independent rotation of the complex rotation, at the same time, the test chamber through the temperature control device to control the gas in the test chamber to reach different temperatures, and then test the gyroscope in the rotation conditions, the impact of different ambient temperatures on the performance of the gyroscope.

旋转温度试验箱
模型			JTR90-Y	JTR125-Y	JTR180-Y	JTR216-Y	JTR275Y	JT340-Y
标称内容积（L）			90升	125升	180升	216升	275升	340升
表现	温度范围		Single axis X; dual axis series -60 ℃~+125 ℃; triple axis Z series -55 ℃~+100 ℃
	温度波动		≤±0.5
	温度均匀性		≤2℃
	温度偏差		≤±2℃
	升温速率（平均）		2℃/min(On load, within the range of+85/-55 ℃)
	冷却速度（平均）		2℃/min(On load, within the range of+85/-55 ℃)
	标准载荷（kg钢锭）		50	60	70	70	80	90
	评论		Above indicators are measured in no load at ambient temperature of 20±2℃ (According to GB/T 5170.2-2017)
Internal dimension (mm)			450*450*450	500*500*500	600*600*500	600*600*600	650*650*650	700*700*700
Unit size (mm)			1500*600*1650	1500*600*1650	1500*600*1650	1430*850*1350	1430*850*1350	1430*850*1350
旋转方向			X-Y-Z轴任意旋转
使用环境温度			5-35 ℃(temperature rise and fall rate measured at ambient temperature of 20 ± 2 ℃)
壳			喷涂钢板
内部			SUS304 stainless steel plate
冷却方式			风冷
控制器			7' 彩色触摸屏控制器
通讯功能			RS485或标准RJ45网络接口、标准USB接口
电源			380V+10%/50HZ+1，三相五线制（3P+N+G）
装机容量(kw)(-/-C)			7千瓦	7.5千瓦	9千瓦	12千瓦	13千瓦	15千瓦
重量（kg）			155公斤	172公斤	190公斤	200公斤	223公斤	240公斤
符合测试方法			GB2423.1-2008、GB2423.2-2008、GJB150.3-2009、GJB150.4-2009
安全注意事项			Power supply undervoltage, overvoltage, phase loss, and phase sequence error protection; Triple over temperature protection; Short circuit protection for heater, refrigeration unit exceeding Voltage/ overload protection; Overload/ overheating protection for blower motor; Control board overcurrent protection and leakage protection
选修的			水冷方式、温度范围、温度变化率、定制工作室尺寸