Introduction Such a series of impact test chamber adopts a structure of cold and thermal chambers and utilizes a bucket rapidly transforming specimens to the test area, so as to conduct cold and thermal shock tests. This impact mode reduces thermal load during cold and thermal impact and shortens temperature recovery time to the greatest extent. Feature

• This series chamber using cold and heat two chambers structure, mainly used for hot and cold temperature impact test material in an instant, in a very short period of time test caused by heat bilges cold shrink can bear by chemical or physical damage.
• 7 inches large color touch screen program control, running status be clear at a glance.
• The user can save 50 to edit test procedure, also has a record of 365 days parameter function (equipped with paperless recorder).
• In accordance with the requirements of recovery time, automatic equipment precooling, preheating temperature, adjust the working status of test cases to be the best.
• Low error, the wind speed is high, the uniform sample exposure.
• Province energy consumption, low noise design.
• Shopping basket conversion time is less than 10 seconds, temperature recovery time for 5 minutes.
• High temperature and low temperature zone can be independently controlled respectively, three with a chamber.
• GJB150.3, GJB150.4, specifically for army GJB150.5, us military standard MIL – STD – 810d test standard design.

 

温度冲击试验箱（两室）
模型			JTS50M-B/S/E	JTS100M-B/S/E	JTS150M-B/S/E	JTS200M-B/S/E	JTS320M-B/S/E	JTS500M-B/S/E	JTS1000M-B/S/E
标称内容积（L）			50升	100升	150升	200升	320升	500L	1000L
Performance Parameter	Heating chamber	温度暴露范围	+50℃～+150℃
		预热温度上限	200℃
		加热时间	RT~+200℃, B type: ≤ 50min; S type: ≤ 40min; E type: ≤ 30min
	Cooling chamber	温度暴露范围	B 型：0~-40°C;S 型：0~-55°C;E 型：0~-65°C
		预冷温度下限	-75℃
		冷却时间	RT~+70℃, B type: ≤ 60min; S type: ≤ 50min; E type: ≤ 40min
	Hand basket	温度冲击范围	B type:-40℃～+150℃; S type: -55℃～+150℃; E type: -65℃～+150℃
		温度波动	≤±0.5
		温度均匀性	≤2℃
		温度偏差	≤±2℃
		转换时间	≤10秒
		温度恢复时间	5 min
		负载（钢）	3公斤	5公斤	7公斤	10公斤	15公斤	20公斤	40公斤
	可选配：高低温测试功能	温度范围	-65℃～+150℃
		升降温速率	B type nearly 2℃/min; S type nearly 4℃/min; E nearly 6℃/min
		评论	以上指标是在环境温度20±2℃条件下空载测定的（按照GB/T 5170.2-2017）
Inner dimensions		D	350	400	500	600	650	800	1200
		瓦	350	500	600	600	600	700	800
		H	400	500	500	550	550	900	1000
外形尺寸		D	2000	2250	2350	2550	1950	2200	2650
		瓦	1400	1570	1670	1670	2700	3000	3000
		H	1950	2150	2150	2250	2300	2400	2600
脚轮			500L以上为4、6（以上外形尺寸不含脚轮尺寸，脚轮升高60-120mm）
测试孔			一个Φ50				1个Φ100
不锈钢搁板（标准配置 2 个）			承重15kg/个	承重30kg/个			承重50kg/个
使用环境温度			0～+40℃
壳			喷涂钢板
内部			SUS304不锈钢
冷却方式			water-cooling, (water temperature 7～28℃, hydraulic pressure 0.2～0.4Mpa，To ensure cooling performance）
控制器			7' 彩色触摸屏控制器
通讯功能			RS485或标准RJ45网络接口、标准USB接口
电源			380V+10%/50HZ+1，三相五线制（3P+N+G）
符合测试方法			GJB150.5-2009, GB/T 2423-2008; The optional high and low temperature test function also meets the requirements of GB2423.1-2008, GB2423.2-2008, GJB150.3-2009, GJB150.4-2009.
安全注意事项			Power supply undervoltage, overvoltage, phase loss, and phase sequence error protection; Triple over temperature protection; Heater short circuit protection, refrigeration unit overpressure/ overload/ oil shortage protection; humidifier fault protection; Overload/overheating protection for blower motor, overcurrent protection and leakage protection for control board; Cooling water shortage protection, gas source undervoltage protection, etc.
选修的			1.可选高低温测试功能;2、可选配专用测试孔和专用货架;3. 可选液氮功能。